Oil Painting Tutorials

Basic Painting Excercises

Learn The Secrete To All Painting Styles With These Basic Painting Tutorials

These basic lessons comprises of:

Click any above listed links to read more on it.

Distance and Texture

Distance and Texture

For more instructional videos visit Bill Martin’s YouTube Channel

Distance and Texture is Your Last Exercise

In this exercise we explore form as it appears in heavily textured subjects and the way colors change as they are seen at different distances.

Distance Changes Colors

As the same colors are seen at different distances they change. When matching colors on your palette you will see that all colors acquire their complements when they are seen farther away.

Even in this short distance the middle reds of the tomatoes are different. The farthest one has the most of its complement (green) in it making it look farther away. Also the green tablecloth as it recedes has its complement (red) mixed with it.

Here the intensity of the colors of the leaves creates the impression of near and far. The most intense colors are always in the foreground.

Look For Texture Between Light and Shadow

Textures are most clearly defined at the transition of the light to the shadow. On smooth objects the edge of the highlight defines the degree of smoothness. On rough objects the change from light to dark defines the texture.

Spheres and cones from smooth to rough, the value shapes within the forms create the illusion of three dimensions.

With these things in mind we paint this subject.

The basic shapes and angles are drawn with thinned white paint on a toned canvas.

Landscape paintings begin with the things farthest away in this case the values of the sky.

The three values of the clouds are blended with a Flat and Filbert sable brushes, to create the softest textures.

The ocean values are put in. As colors recede they become less intense so the blue ocean at the horizon has more orange in it than the blue ocean in the front.

All receding colors become less intense. Their complements are added as their distance is increased.

The grass in the distance is the same color as the grass in the on the hill but because it’s farther away it is less intense. The yellow-orange of the grass has its complement, blue-violet, added as it is seen farther away.

Texture begins. The edge of a Flat brush is used to begin the grass.

The darks of the trees are placed first here to further define the drawing. The edge of a Flat bristle brush is used.

Next the lights are placed.

The middle values complete the form.

The lights and darks for the foreground grass are put in.

And the middle value completes the form. Notice the change in intensity of the grass colors in the distance, on the middle hill and in the foreground.

This is the first layer of paint. Oil paint is well suited to working in layers if you want to improve an area or add something else, wait three days for it to dry before adding new paint.

With your review of the basic information and the completion of these four exercises you should have enough different types of painting experiences to be equipped to paint anything you want. So what are you going to do? You can send me a photo if you like.

The Credits Of The Tutorial Goes To: Bill Martin

Source: http://guidetooilpainting.com/basicForms.html

Color and Form

Color and Form

In this exercise the colored toys provide bright simple forms to practice mixing three values of colors. When you see a colored object you are seeing many values of that color. Because the first step is always simplification, we reduce the values to three, a light, middle and a dark. When these are blended many values are made. Of the three values the middle value is usually the closest to the actual color of the object. The dark is usually the middle value color with its COMPLEMENT added. The light value is the middle value color plus the color of the light, usually white. Highlights, the bright spots of light, are distorted or blurred pictures of the light source.

All forms begin as three values. Shiny forms will also have a highlight.

The dark value will usually have the complement of the middle value added.

Lay out your colors on your palette in this order. On the edge farthest from you, put your white on the left. As a right-handed painter you will have to reach the farthest to get to the white thus reducing the degree of contamination from neighboring colors. Next is cadmium yellow light, then cadmium yellow, cadmium orange, cadmium scarlet, cadmium red, Quinacridone rose, dioxazine violet, French ultramarine blue, thalo blue, thalo green, cadmium green and cadmium green pale. Black may also be added but is so rarely used it is put out only as needed.

If you are using the minimum palette of colors, lay them out as white, cadmium yellow, cadmium orange, cadmium red, Quinacridone rose, dioxazine violet, ultramarine blue and cadmium green. The intermediate colors such as yellow-orange or blue-violet will have to be mixed when needed.

With these things in mind we will paint these toys.

The drawing is made with white paint that has been thinned down.

Starting with the teapot put in the light value first. The blue is a mixture of French ultramarine and thalo blue. For the light we just add white.

Next we put in the dark. The dark is the middle value blue with the addition of blue’s complement, orange. A deep dark is needed so no white is used. In all cases a color’s complement is added to the shadowed part of the object.

The middle value is the true color of the object.

The values are blended with parallel strokes and the illusion of form is created.

Next are the yellows. Three values of yellow are created. The spectrum color is pure yellow. The middle value is Cadmium yellow light with a little white. The light value is the middle value with more white added. Shadows always contain the complement of a color thus the dark is Cadmium yellow pale plus its complement Dioxazine violet. The light value is placed around the highlight. The highlight is a distorted picture of the light source as it is on all shiny objects.

The dark is next. The sequence of light, dark and middle is used. Light is used first to minimize contamination from the wet paint. Dark is next because it is easy to see. The middle value is last and unifies the form.

If an area it is not light or dark it has to be the middle value.

Parallel and curved brush strokes are used for the blends.

Red-red-violet is the spectrum color for the monkey. White is added for the middle value.

More white is added for the light value. The shadow color is the red-red-violet plus its complement yellow-green.

The dark value is placed.

The middle value fills in everything else and is blended.

The colors for the bell lyre are violet-blue-violet with a trace of its complement, yellow, plus white. The mixture is already dark so white is added for the middle value. More white is added for the light value.

The penguin’s feet are orange-yellow-orange with a trace of blue. White is added for the light value. More blue is added to the middle value to make the dark value.

The black for the penguin is actually blue with orange added. Additional white is added for the penguin’s belly values and for the teapot’s top and bottom.

The values are blended.

The background values are placed. Three values of white with yellow and violet will create the flat receding surface of the floor. One value of white with more violet and yellow added creates the back wall that is parallel to the canvas.

The values are blended.

Last the cast shadow values are placed. The color of a cast shadow is the complement of the color of the light. The orange (with some blue) cast shadows indicate a cold light.

The blends finish the painting.

So now you have learned to mix your colors. You know how to create shadow colors and highlight colors and all the transitions in between.

The Credits Of This Tutorial Goes To: Bill Martin’s

Source: http://guidetooilpainting.com/colorForm.html

Values Within Colours

Values within Colors

Seeing Values Within Colors is Important

In this exercise the colors are seen only as lights and darks (or values). This painting will teach you to paint more complex forms than the previous exercise and it will teach you to see a color’s value. Print out the source photo or create a colorful still life of your own to paint from.

Value is the relative lightness or darkness of a color.

A color’s values create our perception of three-dimension.

Because we create form by first dividing a color into it’s light, middle and dark values it is important to recognize each color’s values.

value scale

For identifying particularly difficult color values a VALUE SCALE is useful.

The value scale is placed over the questioned color.

value scale with blue

You then determine which value it isn’t. Clearly the value of the blue is not # 9 or # 1. It’s not #’s 8,7 or 6 because the blue is darker than these. The true value of a color will be between too light and too dark on the value scale. The blue is lighter than #2 and darker than # 4. Its value is #3.

value scale with yellow

Which is too light and too dark here? (It’s a #7 value)

With these things in mind we will paint this subject. Using only black and white mix several values of gray on your palette.

The drawing is made with thinned white paint on a toned canvas. White is used because it will create the least contamination of subsequent colors. The drawing should remain simple because a complex drawing would soon be painted over and lost.

The pure white patches are the highlights. They are put in first here to keep them as clean as possible. The highlight on a shiny object is a distorted picture of its light source. The light value for this pepper is placed around the highlight and wherever else the light value appears.

Next the darks are placed.

If it’s not the light and not the dark it’s the middle value.

The middle and light values are blended with a Flat brush.

The pepper is blended using parallel and curved strokes with Flat bristle and Flat sable brushes.

The first pepper was the lightest in value. This second pepper is the darkest in value. In the three values we use for this darker pepper the light value is the same as the middle value of the first one. Once again the light value is placed around the highlight.

The darks are put in. They are darker than the darkest darks of the first pepper.

The middle values are put in wherever the lights and darks are not. A Flat bristle brush one inch wide was used.

The blends are mostly made with curved brushstrokes using a Sable Flat.

The right hand pepper is a value between the first two. Each of these peppers has its own set of three values.

The cabbage is begun. Its value shapes establish the form first.

The cabbage is loosely blended to strengthen the illusion of three-dimension.

The texture of the cabbage leaves is then established working wet paint into wet paint. This is one of the advantages of a slow drying paint.

The other cabbage is a different set of three values but it has the same form.

The texture is applied to the second cabbage using wet paint into wet paint.

Cast shadows are the absence of light so their values are dependent on the surface value and the strength of the light. Bright light makes dark shadows.

The background cleans up the edges.

Thus you have seen the importance of the values within the colors and how they alone create the illusion of form. Plus you have used the paint in new ways.

The Credits Of This Tutorial Goes To: Bill Martin’s

Source: http://guidetooilpainting.com/colorValues.html

Oil Painting Basics

Basic Knowledge Required To Start Oil Painting


What is Oil Paint? Oil paint is a type of slow-drying paint that consists of particles of pigment suspended in a drying oil, commonly linseed oil. The viscosity of the paint may be modified by the addition of a solvent such as turpentine or white spirit, and varnish may be added to increase the glossiness of the dried oil paint film.

Oil Paints comes in tubes and can be mixed on a palette with palette knife to get another colour, it can then be applied to a surface or space using stiff brushes. Oil Paints can be used on Canvas, Panel, Board or any other suitable surface.

Oil Paints provides room for modification due to its slow drying time. It dries through oxidation and this may take up to three days, the slow drying time has its advantage and disadvantage, the advantage is that it gives room for modifications like, cleaning, blending, and adjusting expecially when making gradual transition from one colour to another. It can be cleaned with rag, palette knife, or any other suitable materials.

The disadvantage of oil paint slow drying time is that colours can smear into each other if not apllied appropriately.

Oil Paint can carry many layers of application, you just have to let one colour dry for at least three days before applying another. Modification can be made sevral times on a layer before applying another. New layer must be thicker than the previous layer to avoid the painting from cracking after drying.

DRAWING: A complex drawing is quickly lost when the oil colors go on, so simple shapes and contour lines make the“ best drawings for oil paintings.

The drawing may be made directly on the canvas or it can be prepared before and transferred to the canvas.

When drawing directly on the canvas, PAINT that has been thinned with thinner is the best. Because it is paint, it doesn’t need to be isolated from subsequent colors.

CHARCOAL can be used for drawing on the canvas. The charcoal drawing must be isolated from the paint layers with FIXATIVE. Vine charcoal is easier to seal with fixative than compressed charcoal.

The drawing can be made with a PENCIL on the canvas. This must be sealed with FIXATIVE before the colors go on. A pencil’s point (if pushed too hard) can make small cracks in the gesso so a thin transparent layer of gesso may need to be applied to re-seal the canvas. If gesso is used in this way the fixative is not necessary.

A drawing that is going to be TRANSFERRED to a canvas is best done on thin tracing paper because the transfer will be clearer. Tape the drawing to the canvas. Transfer the drawing using carbon paper. Draw over your drawing with the carbon paper beneath it. Use a contrasting color ballpoint pen so you can see where you’ve already drawn and to get a consistent line size. The carbon transfer should also be separated from the paint layer with fixative or a thin transparent layer of gesso.

BLEND: A blend is the gradual transition from one color to another. Oil paint, because it takes time to dry, allows you to move the wet paint around on the canvas. This makes it easy to do the thing most difficult to do with other types of paint, the blend. All brushes will blend oil paint. Flat brushes are best and rounds the worst. The principles are the same for large and small blends.The colors are mixed on the palette and applied in their approximate location on the canvas. The brush is then dragged back and forth in a crosshatch stroke between two values until a satisfactory transition is made. Parallel strokes are then used to refine the transition of values. A clean brush is used for the dark to middle and another clean brush for the light to middle.

(A) In a blend the brush strokes are ALWAYS perpendicular to the light. In a circular blend the brush must rotate to remain perpendicular to the light so curved brush strokes are used.

(B) The placement and size of value shapes within a blend create the contour of the surface. Note the value placements for flat surfaces on the left and curved surfaces on the right.

MATCHING COLOURS: A rainbow gives us pure examples of the basic colors of the visible world. The rainbow’s colors are, in order, red-violet, red, red-orange, orange, yellow-orange, yellow, yellow-green, green, blue-green, blue-violet and violet. When this order of colors is formed into a circle we have the COLOR WHEEL. The color wheel is an essential tool for matching colors.

The Color Wheel
The wheel is arranged with yellow, the lightest value color at the top and violet, the darkest value color at the bottom. From the top down on the right are yellow-orange, orange, red-orange, red, and red-violet. These are called the warm colors. From the top down on the left are yellow-green, green, blue-green, blue and blue-violet. These are called the cool colors.
Complementary Colors
Any TWO colors directly across the color wheel from each other are called COMPLEMENTARY COLORS. Red and green are opposite each other on the color wheel and therefore are complementary to each other. Yellow and violet are each other’s complements. Yellow-green and red-violet are complements. Complimentary colors when placed next to each other on the canvas intensify each other. Complementary colors when mixed together on the palette neutralize each other. In this chart the pure intense colors are on the outside opposite their complements. As we move to the middle, the complements are mixed together until they become gray, the least intense of all.
Color Values

All colors come in all values. The pure spectrum colors are in the position of their relative values on this seven-value scale.

With These Things in Mind, This is How to Match Any Color

We have only to answer these three questions to match any color we see.

1. WHAT COLOR IS IT FROM THE COLOR WHEEL? (Its spectrum color)

2. HOW INTENSE IS IT? (How much of its complement does it contain? More complement means less intense.)

3. WHAT VALUE IS IT? How light or dark is it?

Below Are Examples On How It Works

The colors in order on the palette

Matching the Brown Leaf

The spectrum color is a red-red-violet. White is added to match the value. Yellow-green, the complement of red-violet is added to reduce its intensity.

Matching the Green Leaf

Green is the spectrum color. Cadmium green is the base color. It is a little to the yellow side so its intensity is reduced using a red-violet (Quinacridone Rose). Yellow-green and red-violet are complementary to each other. White is added to match the value.

Matching the Silver Tape

Blue is the spectrum color. White is added to match the value.

Orange, the complement of blue is added and the color becomes gray.

Matching the Colors of a Three Dimensional Object

In this case a bar of soap.

The middle value is first. The spectrum color is yellow-orange. A small amount of its complement, blue-violet, is added to match the intensity plus a trace of white.

White is added to the middle value to create a light value. Blue-violet is added to the middle value yellow-orange to create the object’s shadow color.

The soap’s colors are matched. A color’s complement will usually make the color’s shadow value. For darker value shadows use the middle value color with less white. In some cases a color’s compliment won’t darken the color enough. This is when you add black to get the value.

CREATING FORM: There are only five basic forms from which all other forms are created. They are the sphere, the cone, the cylinder, the cube, and the doughnut shaped torus. Parts of these forms combine to create everything we see. Imagine a half cylinder on top of a cube and you have the shape of a mailbox, a half sphere and a cone make a teardrop form, a fir tree is a cone an oak is a half sphere. The cylindrical coffee mug has a half torus handle.

Values Create Form

Each of these forms has distinctive light and dark value shapes that define them. Spheres are recognized by crescents and ovals. Cones have triangular light and dark value shapes. Cubes and flat surfaces are even blends. Cylinders are stripes. The torus is crescents and stripes. Concave versions of these forms have the same value shapes but without reflected light. (See Shadows/Reflected light.) When you can paint these five forms you can paint all other forms.



click on an image to enlarge

A SPHERE is defined by CRESCENTS AND OVALS. Sphere forms are painted with crescent and curved brush strokes. (See Brushes)



click on an image to enlarge

CONES are defined by TRIANGULAR values of light and dark. Cones are painted and blended using triangular brush strokes.



click on an image to enlarge

CYLINDERS are defined by light and dark value STRIPES. Cylinders are painted with parallel brush strokes.



click on an image to enlarge

CUBES and all FLAT surfaces are governed by the same rules. GRADUAL EVEN BLENDS depict a receding flat surface. If there is a flat surface parallel to your canvas, it may be painted with a single color or value. CUBES are various receding flat surfaces. Each surface is a gradual blend. Cubes are painted with parallel brush strokes.



click on an image to enlarge

TORUS value shapes combine aspects of two other basic forms. They take the parallel STRIPES of a cylinder for the middle and the CRESCENTS of a sphere for the ends. The torus is painted using crescent and curved brush strokes.



click on an image to enlarge

Here you can see that value shapes are stronger than contour lines for the creation of form.

Lighting can be misleading in seeing forms, particularly flat surfaces. Try to see the form first. Then see the lighting on it.

GLAZE/WASH: TRANSPARENT layers of oil paint are called GLAZES.

TRANSLUCENT layers of oil paint are called WASHES.

Both are colors thinned with a solution of 1/3 linseed oil, 1/3 turpentine and 1/3 Damar varnish.

A GLAZE is a thin TRANSPARENT color used over another dry color to create a third color. For example if you put a thinned Quinacridone rose (a transparent color) over blue, you get a violet. If you use a glaze over a similar color you enhance the color. Cast shadows over complex textures are often glazed. A glaze always darkens a color. (See Paints for transparency and opacity)

This is a Glaze

By example, the beetle’s carapace needs to be greener.

The GLAZE formula is mixed on the palette with thalo green (a transparent color) until the degree of transparency necessary is achieved.

The glaze is then applied with a sable brush to the horizontal painting. Allow it to dry overnight. With a glaze you can change a color with out changing the pattern of brush strokes of the underlying layer of paint.

This is a Wash

A WASH is a thin OPAQUE color used over another dry color. A wash will not change its essential color and appears as a TRANSLUCENT layer on top of other colors.

Mix the color with the glaze solution on your palette until you have the degree of translucency needed. Apply it to the horizontal painting with a sable brush.

White (an opaque color) is used with a glaze solution to create the rays of light. Allow it to dry overnight.

SHADOW: Shadows are divided into three categories. First is the shadow side of an object known simply as a SHADOW. Then the CAST SHADOW which is the absence of light caused by an object in its environment. Third is the PROXIMITY SHADOW that is caused when objects touch or nearly touch. Read More…

CONTRAST: CONTRAST is the relationship between the lightest light and the darkest dark on an object or in an environment. Learn More…

TEXTURE: TEXTURE IS MOST CLEARLY SEEN AT THE TRANSITION OF THE LIGHT TO THE SHADOW. On smooth objects the highlight is a distorted picture of the light source. The sharpness of focus of that picture defines the smoothness of the object. The glass bottle is smoother than the aluminum bottle, which in turn is smoother than the wax candle. We know this from the focus of their highlights. Learn More…

Oil Painting Materials

Materials Required To Get Started With Oil Painting Medium


Materials needed are oil paints, brushes, a place to mix your colors, a tool to mix them with and a surface to paint on. Plus you want a way to clean up. The ingredients are easy to find and you don’t need a lot of them. You can do a lot with a little. Good brushes and good paints are easier to use and go farther than the cheap ones.

Paints: a type of slow-drying paint that consists of particlA top view of variously colored tubes of paint.es of pigment suspended in a drying oil, commonly linseed oil. The viscosity of the paint may be modified by the addition of a solvent such as turpentine or white spirit, and varnish may be added to increase the glossiness of the dried oil paint film. 

Brushes: A paintbrush is a brush used to apply paint or sometimes ink. A paintbrush is usually made by clamping the bristles to a handle with a ferrule. There are different types of brushes, we have Decorator’s brushes, Bristle Brushes, Artist Brushes and brush also come in different shapes and sizes, shapes can be round, flat, angle, mop, filbert, fan etc.. Sizes can be from small to biger size (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, etc..)

Palette: A rigid, flat surface on which a painter arranges and mixes paints. A palette is usually made of wood, plastic, ceramic, or other hard, inert, nonporous material, and can vary greatly in size and shape. The most commonly known type of painter’s palette is made of a thin wood board designed to be held in the artist’s hand and rest on the artist’s arm. Watercolor palettes are generally made of plastic or porcelain with rectangular or wheel format with built in wells and mixing areas for colors.

Palette knives: A palette knife is a blunt tool used for mhttps://i1.wp.com/www.italianartstore.com/store/media/IAS/PAL12.jpgixing or applying paint, with a flexible steel blade. It is primarily used for mixing paint colors, paste, etc., or for marbling, decorative endpapers, etc. The “palette” in the name is a reference to an artist’s palette which is used for mixing oil paint and acrylic paints.

Thinner: A paint thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled “Paint Thinner” are usually mineral spirits having a flash point at about 40 °C (104 °F), the same as some popular brands of charcoal starter.

Canvas: Canvas is an extremely durable plain-woven fabric used for making sails, tents, marquees, backpacks, and other items for which sturdiness is required. It is also popularly used by artists as a painting surface, typically stretched across a wooden frame. It is also used in such fashion objects as handbags, electronic device cases, and shoes.

Gesso: is a white paint mixture consisting of a binder mixed with chalk, gypsum, pigment, or any combination of these. It is used in artwork as a preparation for any number of substrates such as wood panels, canvas and sculpture as a base for paint and other materials that are applied over it.

Easel: An easel is an upright support used for displaying and/or fixing Wooden easel standing in empty room.something resting upon it, at an angle of about 20° to the vertical. In particular, easels are traditionally used by painters to support a painting while they work on it, normally standing up, and are also sometimes used to display finished paintings. Artists’ easels are still typically made of wood, in functional designs that have changed little for centuries, or even millennia, though new materials and designs are available. Easels are typically made from wood, aluminum or steel.

Studio / Lighting: A studio is an artist‘s or worker’s workroom, or the catchall term for an artist and their employees who work within that studio. This can be for the purpose of acting, architecture, painting, pottery (ceramics), sculpture, origami, woodworking, scrapbooking, photography, graphic design, filmmaking, animation, industrial design, radio or television production broadcasting or the making of music. The term is also used for the workroom of dancers, often specified to dance studio.

Varnish / Retouch Varnish: Vanish is a brand of stain removing products owned by Reckitt Benckiser, sold in Australia, India, South Africa, the United Kingdom and much of Europe. In North America, these products are sold under the Resolve brand name.

Here Is A Video On Oil Painting Materials By Bill Martin’s